Stop error: 0x000000D8-0xC0000221

0x000000D8: DRIVER_USED_EXCESSIVE_PTES
This error occurs when the driver requests excessive kernel memory space.

0x000000E3: RESOURCE_NOT_OWNED
This STOP-error is caused by various faults related to the file system. The problem may result from NTFS.SYS. driver.

0x000000EA: THREAD_STUCK_IN_DEVICE_DRIVER
The faulty driver has lead to system hung-up. Basically it’s caused by display driver while the process of PC transition to standby mode. This problem is related to video adapter or bad video driver.

0x000000ED: UNMOUNTABLE_BOOT_VOLUME
Boot disk connection failure has happened. This error may happen to PCs with high-performance disk controllers which were not correctly configured and installed or connected with the help of poor cable. Systemmaystartoperatingcorrectlyafterregularreboot. This error may also happen after Windows incorrect termination so failure mentioned above may result from file system corruption.

0x000000F2: HARDWARE_INTERRUPT_STORM
This message appears if the kernel detects interrupt storm, i.e. when requested by interrupt level device cannot generate interruption request. Usually it’s caused by bad driver.

0x000000F3: DISORDERLY_SHUTDOWN
Windows termination session has failed because of memory shortage. Detect what program hit “memory limits”, try to find out why virtual memory does not provide system resources required and investigate if the program (or driver) denies its shutdown without memory open pages disposal.

0x000000FA: HTTP_DRIVER_CORRUPTED
The system driver Http.sys is corrupted. This component should be restored with the help of original disk.

0x000000FC: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
There was an attempt to execute some operation in non-executable memory.

0x000000FD: DIRTY_NOWRITE_PAGES_CONGESTION
There is no free page memory required for main system operations execution.

0x000000FE: BUGCODE_USB_DRIVER
A critical error has happened to USB controller and relative devices. The problem is generally caused by incorrect USB controller performance or connected USB devices malfunction. Disconnect all USB devices and try to disable USB controller in BIOS. Update USB drivers.

0x00000101:CLOCK_WATCHDOG_TIMEOUT
This error means that the expected clock interrupt in the secondary processor of multiprocessor system did not take place within the certain time limit. This processor does not process interrupts. Usually it happens, when the processor does not respond or perform infinite cycle.

0x00000104: AGP_INVALID_ACCESS
This error is caused by graphic processor’s attempt to write data in memory that was not reserved for this operation. The error is related to video driver or an old BIOS version.

0x00000105: AGP_GART_CORRUPTION
This error occurs because of Graphics Aperture Remapping Table (GART) corruption. It results from incorrect DMA driver performance.

0x00000106: AGP_ILLEGALLY_REPROGRAMMED
This error is caused by unsigned or corrupted video driver. Replace the video driver.

0x00000108: THIRD_PARTY_FILE_SYSTEM_FAILURE
A fatal error occurred to the third-party file system filter. This error may be caused by antivirus software, defragmentation programs, data backup programs and other third-party utility programs. You can also try to increase swap file volume and RAM memory capacity.

0x00000109: CRITICAL_STRUCTURE_CORRUPTION
The system kernel has detected invalid code or data corruption. 64-bitsystemsareprotectedagainstthiserror. The problem might have been caused by RAM memory fault or the third-party drivers.

0x0000010E: VIDEO_MEMORY_MANAGEMENT_INTERNAL
Video driver internal error has happened. The problem is caused by video driver.

0x00000112: MSRPC_STATE_VIOLATION
The system component msrpc.sys has returned the error code while operation. The error code is identified in the first parameter.

0x00000113: VIDEO_DXGKRNL_FATAL_ERROR
The kernel DirectX Graphics has detected a critical error.

0x00000114: VIDEO_SHADOW_DRIVER_FATAL_ERROR
Shadow video driver has detected a critical error.

0x00000115: AGP_INTERNAL
Video port driver has detected a critical error in video interface AGP.

0x00000116: VIDEO_TDR_ERROR
Video driver time-out dump was not performed successfully.

0x0000011C: ATTEMPTED_WRITE_TO_CM_PROTECTED_STORAGE
There was an attempt to write data in area protected from configuration manager writing.

0x00000121: DRIVER_VIOLATION
Driver has violated an access into one of memory areas.

0x00000122: WHEA_INTERNAL_ERROR
An internal error has happened to Windows Hardware Error Architecture (WHEA)

0x00000124: WHEA_UNCORRECTABLE_ERROR
Hardwareerrorhashappened. This error is detected by Windows Hardware Error Architecture (WHEA)

0x00000127: PAGE_NOT_ZERO
The memory page was not filled with zero. This error results from hardware faults or operation of the operating system privileged component that caused premature memory page changing.

0x0000012B: FAULTY_HARDWARE_CORRUPTED_PAGE
A single bit error has been detected in memory page. This error is related to machine RAM memory.

0xC000009A: STATUS_INSUFFICIENT_RESOURCES
The operating system kernel has exhausted all system resources including swap file. Check for disk errors. Increase hard drive and RAM memory capacity.

0xC0000135: UNABLETOLOCATEDLL
Windows made an attempt to boot DLL library and got the error code. File corruption or absence is a possible reason. The system register may also be corrupted.

0xC0000142: DLL Initialization Failure
This error has been caused by DLL system library corruption.

0xC0000218: UNKNOWN_HARD_ERROR
The system register file cannot be booted. The file may be corrupted or absent (a safety disk or Windows reinstallation is required). The system register files have possibly been corrupted because of hard drive fault. The driver has probably corrupted system register data while bringing into memory or memory where the system register has been loaded has parity error (disable external cache and check main storage).

0xC000021A: STATUS_SYSTEM_PROCESS_TERMINATED
This error occurs when Windows switches to privileged mode but non-privileged mode subsystems such as Winlogon or CSRSS cause some fault so protection cannot be guaranteed. Since Windows XP cannot operate without Winlogon or CSRSS this is a rare situation where non-privileged mode maintenance denial can force the system to stop responding. It also may happen if PC was restarted after the system administrator had changed authorization so that the system account has no longer adequate rights to call system files and directories. This error may also be caused by user32.dll file corruption or incorrect system drivers .sys.

0xC0000221: STATUS_IMAGE_CHECKSUM_MISMATCH
Driver has been corrupted or the system library has been recognized as corrupted. The system takes all possible measures to check main system files integrity. The blue screen displays the corrupted file name. If you encounter such situation boot any other operating system or, if you don’t have any, reinstall your current operating system. Make sure that the version of file recognized as corrupted coincides with the system distributive file version. Ifso,replaceit. Continuous errors with different file names mean that there are problems with data carriers or disk controller where these files are located.